EPDM as a seal material is ideal as it is suitable for water, good resistance to weather influences, and suitable up to a maximum temperature of 120 ☌ or 130 ☌.Īre you looking for another solenoid valve type? Please take a look at our general solenoid valve category.12 Volt Fuel Valves have a variety of uses. Brass as a housing material is ideal as it is resistant to water (won’t rust) and is durable. The available port sizes are:Īll products shown have a brass housing and an EPDM seal material. This selection of valves are 2/2-way, and the inlet and outlet ports are both female. The correct orientation is denoted with an arrow on the valve housing. Note: Proper valve orientation of inlet and outlet is important for proper function. Semi-Direct Operated: A pressure differential isn’t required, but assists in the operation.Indirect Operated: Requires a pressure differential (typically 0.5 bar) to function properly.Direct Operated: Doesn’t require a pressure differential to function properly.The considerations for operating type are:

Additional Water Solenoid Valve 12V Selection Criteria Read below for additional product specification considerations.

This category only contains brass housings and EPDM (Ethylene Propylene Diene Terpolymer) seals, which is ideal for water applications. When 12V DC is applied, they are fast acting and will open allowing water to flow from the inlet to the outlet (2/2-way). The valves are normally closed (NC), meaning that when 12V DC is not applied the valves will be closed and prevent water from flowing through.

View Tameson’s selection of water solenoid valves 12V DC.

12 volt electric solenoid valve